The Tskylon Labs Blank tile panel is just that, a blank panel. It could also be used for a DIY Tile project panel.
NOTE; This tile module does not conform to the Intellijel 1U standard
NOTE: All non-passive modules can be powered from either a standard 2×5 Eurorack Power Header as well as the Futaba style 3 wire connector poplularised by PulpLogic.
DO NOT connect both – just one OR the other.
We present to you, the PLITKA series – DIY for the people!
"The Eurorack rabbit hole runs deep – or maybe shallow. Introducing our line of 1U Eurorack Tile Modules – PLITKA. Our PLITKA Panels are made from 2mm thick matte black PCB Material. We are releasing these as Open Source Hardware (cc by-sa). You will find technical specifications about each module and will find a PDF document that contains the Bill-of-Materials (BOM) for the module as well as instructions for assembly and the schematic. If you would like to make your own panels, you can download our PLITKA Panel standards as a PDF (Adobe Portable Document Format) or a DWG (AutoCAD) file."