SVALBARD is a 18hp, 3 channel broken delay and no-input mixer, with both series and parallel outputs. Each output has dedicated filters for each filter and cv control over delay time. As well as being used as a “standard” broken delay it can also be used as a no input mixer (similar to Shakti) patching one (or several) outputs into one of its inputs. Then patch out from any of the outputs you are not using. Manipulating delay time and filters will have a huge effect on the sound. The delay section can be used either in series or parallel, patching into channel one and patching out of channel 3 will give you the signal in series (sound passing through all 3 delays in series giving you long delays). Patching into 1 channel and out of the same channel will give you parallel delays (which means you can use this with three different sound), mix output will always give you all three delays in parallel.