The VIM voltage injecting mixer is a compact fully DC coupled two channel mixer module with the possibility to inject an +/- 8V offset on the incoming voltages.

Channel one has an attenuverter circuit which allows to invert or attenuate the incoming signal. The Attenuverters maximum gain can be set with a resistor on the board (Gain +/- 1 or +/- 2).

Channel two is fed right away into the summing circuit of the module.

If there are no signals connected at the channel inputs the module simply acts as an offset voltage generator.

The final output voltage is displayed by the backlit syringe on the frontpanel. Red indicates positive voltages, green indicates negative voltages.

Tunable Parameters:

• ATV (sets the gain of Channel 1)
• OFFSET (adds offset to the outgoing signal)

I/O:

• IN is the input jack for channel one
• IN2 is the input jack for channel two
• OUT is the summed output of IN, IN2 and the OFFSET voltage

Power:

• +12V 5mA / -12V 5mA

Dimensions:

• Width: 4 HP (20mm)
• Depth: 13mm