10% off site wide. Shipping is closed for the holiday weekend. All orders will ship on July 9th.
Manhattan Analog's MIX is a 4HP CV mixer designed for clean, high-quality audio mixing.
This is a PCB/Panel set in the Eurorack format.
The Manhattan Analog MIX is a 4hp Eurorack module designed primarily for clean, high-quality audio mixing. It is DC-coupled so that it retains utility as a CV mixer when necessary. Jacks are at the bottom so that it retains tweakability even when fully-patched.
Under the hood, it's a dead-simple op amp mixer with three unipolar inputs and an output which can be switched between uni- and bi-polar operation with a jumper on the board. The inputs use audio-taper pots and the output is linear to facilitate both modes of operation. It is reverse-power-protected and is completely skiff-friendly at just over 1.25" deep [33mm.] As for the op amps used, 7 different chips were tested, but there are two clear favorites - OP275 and LME49720. These consume 25mA of current, 12.5 from each rail, using the favorite LME49720.
Brand | Manhattan Analog |
---|---|
HP | 4 |
Depth | 38mm |
+12V | 12.5mA |
-12V | 12.5mA |
Additional Resources | Build Guide |