The Gate Sequencer XL is a really fun module to play with! Consisting of 8 individual Gate Stage outputs (stackable), and two Gate/Trig Buses. Toggle Switches allow you to switch between Gate, Trigger or Off per stage. Hold, Reset/Hold and Clock Input’s are also 
provided. The Trigger length is set by the clock input pulse width which can make for some very fun rhythmic potential if you clock via a Pulse source w/ PWM! Because of this feature the trigger output LED’s will appear very faint if not none existent with short clock input pulse width! 

The LGE089 V1 main PCB’s require two traces to be cut. Originally my thought was to have a “mix” and “trig” output, but since all of the Gate/Trig outputs can be stacked, I decided to keep them isolated. The trace cuts simply isolate the Trigger and Gate bus buffers from each other. Please see the documentation below for excicuting these easy modifications. 

For the Gate Sequencer (not XL)

**The parts located within the white outlined box on the PCB are used for the Gate Sequencer XL. They do not need to be installed for use w/ this version of the module.