I’ve been doing no-input mixing with guitar pedals and various devices for almost two decades, while the modular synth is a wonderful instrument in itself it’s lacking a standalone, dedicated device for no-input mixing which was odd to me because feedback mixing is such a huge part of experimental music. I decided to invent such a device if not for my own needs as a musician.

Shakti contains 3 different feedback loops in a very small package. 2 internal ones (represented but the pots Feedback and Feedback II, where Feedback is a normal signal, Feedback II which is an inverted signal and Receive – an external path (one that you send out from the module, through the modules of your choice and then back again). When working with feedback all three of these will intermingle fast which means both feedback pots and receive knobs will affect each other. A filter is attached to the first feedback path but since all signals will intermingle in this circuit (it is a mixer after all) so the filter will affect all three paths. Starting with the knob in the middle, it has a lowpass filter to the right and high pass to the left. OUTPUT I contains the inverted signal whereas OUTPUT II contains the normal signal. Shakti can be used as a stereo module since the 2 outputs might differ tremendously at times

!!!WARNING! DEALING WITH FEEDBACK CAN BE HAZARDOUS TO YOUR EARS AND GEAR SUCH AS OTHER MODULES, SPEAKERS, DAWS, MIXERS ETC. TO BE SURE YOU HAVE HEALTHY LEVELS ALWAYS PLACE AN ATTENUATOR OR ATTENUATED MIXER OUTPUT BETWEEN YOUR MODULAR AND OTHER GEAR. IT MIGHT ALSO OPEN GATES TO UNKNOWN SONIC DIMENSIONS. DJUPVIKS ELEKTRONIK AND THONK TAKE NO RESPONSEBILITY IF GEAR WITHIN YOUR MODULAR OR OUTSIDE IS HARMED BECAUSE OF SHAKTI. YOU HAVE BEEN WARNED! PRECEIDE WITH CAUTION! WARNING!!!