Collude - Envelope Follower PCB | NonLinear Circuits
Collude - Envelope Follower PCB | NonLinear Circuits
Special Price
$17.00
Regular Price
$20.00
This module is a fairly straightforward envelope generator (based on the Electronotes design) and gain stage - for bringing external signals into your modular synth.
This is for a PCB only designed for the Eurorack format.
Availability:In stock
BrandNonLinear Circuits
This module is a fairly straightforward envelope generator (based on the Electronotes design) and gain stage.
The gain stage can be set to increase a signal’s amplitude from 2X up to 20X. This allows signals from guitars or microphones to be ramped up to levels suitable for processing in a modular synth. The envelope follower has been designed to have a somewhat ridiculous amount of gain so that very low level signals can be used to form much larger envelopes than they should, there is a trade-off when using this function as the envelope is quite jittery and dirty (over-sensitive), this is not necessarily a bad thing. For normal use, say with a guitar, the respond pot would be kept quite low.The gate pot controls the comparator threshold level; use this to get gates as wide or narrow as you wish in response to the incoming signals.
| Brand | NonLinear Circuits |
|---|---|
| HP | 8 |
| Additional Resources | Build Guide |