Gats is a 12hp reverb and filter with sample and hold control. With nothing plugged into
the sample and hold input the circuit uses the audio signal as its source. Plugging
something into sample and hold input overrides this. There is also a sample and hold
output which you can use regardless of what source is being used. This unit is thus
possible to use as a stand a lone sample and hold circuit without using the filter or the
reverb. The signal first hits the reverb and there is a switch for the reverb to be fully wet
or 50-50 dry/wet. The filter is positioned after the reverb and the CV knob controls how
much of the sample and hold which will affect the filter. The filter has both a frequency
control and q control and is a bastardized version of the bandpass found in the
legendary WASP filter. The sample and hold has an onboard clock wich can be
overridden by plugging in a clock into the Gate input. The feedback switch lets you
chose between 2 different feedbacks, pre and post filter which both has their own
flavor. The one post filter is influenced by the filter modulation and filter knobs. Lastly
there is an offset knob which when set 12 o'clock presents no offset at all, going anti
clockwise it presents more and more negative offset and going clockwise it presents
more and more positive offset.