Zlob Push VCA Kit

The Push VCA consists of 2 independent unity gain dc coupled VCAs with led push button switches to turn channels on and off.


This is a Full kit in the Eurorack format.

Availability: In stock

$64.99
OR

Details

Details

The Push VCA consists of 2 independent unity gain dc coupled VCAs with led push button switches to turn channels on and off. A mix of both channels is available at the sum. All outs are available simultaneously.great for cv or audio.

There are 2 trimmers on the pcb, for zeroing out the bleed on each vca. you can get all scientific and measure the db. but I just do it by ear. insert a harmonically rich waveform like a saw or square into the audio input with the panel control/knob at full ccw(counter clockwise)and plug the out to whatever mixer/amp chain you work with(maybe turn your mixer/speakers up louder than usual) and then turn the trim on the pcb to the left/ccw until the vca is silent. If your vca is silent from the start then good, and move on and repeat for each channel.

Motherboard is same as dual vca. See dual vca build docs.

Specs & Downloads

Specs & Downloads

100 Zlob Modular
HP 2
Depth 60mm
+12V 20mA
-12V 20mA
+5V No
Additional Resources Build Guide
BOM

Reviews

Write Your Own Review

You're reviewing: Zlob Push VCA Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.