Ian Fritz 2xAD/AR

Timo Rozendal's 4hp DIY eurorack adaptation of the Ian Fritz AD/AR.

Availability: In stock

From: $14.99

To: $89.97

Price as configured: $0.00



This novel envelope generator (EG) provides a versatile, cost-effective alternative to other designs. It will take just about any signal you feed it and generate an envelope. For example, its main input can accept either a trigger or a gate signal. Driven by a trigger pulse, the unit's output is an attack-decay (AD) envelope; driven by a gate its output is an attack-release (AR) envelope. And you can even use a continuous signal like an LFO for the gate! An auxilliary circuit produces a delayed, fixed-width pulse (monostable, or "Mono") which also drives the EG circuitry. This pulse may be initiated by any signal with a positive-going 1.5 V crossing, for example, a trigger pulse or a waveform from an LFO, noise source or chaos generator. A dedicated output jack for the pulse generator allows other, independent, timing applications.

This version also has the following modifications: 

  • It has twice the ad/ar envelope circuit 
  • It is without the delayed pulser part 
  • There is a led indicator to show if an envelope is active 
  • Input of the first envelope is normalled to the second envelope 
  • There is an additional switch that converts a gate into a trigger, combined with the previous modification this can result an a simultaneous AR and AD envelope with one incoming gate signal 

Specs & Downloads

Specs & Downloads

100 Timo Rozendal
HP 4
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide & BOM


Write Your Own Review

You're reviewing: Ian Fritz 2xAD/AR



Use spaces to separate tags. Use single quotes (') for phrases.