New

Rakit Metal Synth Kit

The Rakit Metal Synth has a Polivok’s inspired filter at its core. It uses this, along with a punchy AD envelope to produce a variety of percussive sounds from shaped noise.
It was designed to be a companion to the Rakit Drum Synth and as such creates a range of mad/interesting sounds and some very useful metallic sounds.


This is for a Full Kit in the Eurorack format.

Availability: In stock

$61.99
OR



Details

Details

The Rakit Metal Synth has a Polivok’s inspired filter at its core. It uses this, along with a punchy AD envelope to produce a variety of percussive sounds from shaped noise.
It was designed to be a companion to the Rakit Drum Synth and as such creates a range of mad/interesting sounds and some very useful metallic sounds.

Kit Assembly

Only two basic soldering tools are required to complete this kit: a soldering iron and a pair of flush cutters. Check out the detailed assembly guide here.

The kit is made entirely of interlocking PCBs and unlike most kits the only wires that have to be soldered are the ones going to the piezo disc.

How it Works

The synth is triggered by a piezo disc which is sensitive to how hard you tap the top panel giving subtle differences in the two stage envelope.

The noise is generated digitally by a pre-programmed microcontroller. The filter at the heart of the unit can be controlled and modified by the Sweep, lowpass/bandpass, Resonance, Cutoff and Cutoff CV.

2x Trigger Options

Trigger by activating the piezo under the touchpad (Metal Logo) or by plugging in an external trigger.

 Powering The Unit

The Metal Synth comes with a 9V pp3 battery to barrel jack connector as standard. We recommend using an alkaline battery, this is not included.

Should you wish to use your own power supply, please ensure it meets the following specifications:

+8V to +12V, Centre positive 2.1mm (centre) x 5.5mm (outside)

 
 

SO WHAT DO THESE TWIDDLY KNOBS DO?

 

SENS: Sets the sensitivity of the trigger/touchpad.

DECAY1: Sets the decay time of the louder initial hit (body).

DECAY2: Sets the lasting decay time (tail).

CUTOFF: Sets the filter’s cutoff frequency and the bias for control voltages to be summed with.

SWEEP: Controls the amount of sweep applied to the cutoff frequency.

RES: Sets the filter’s resonance. The filter will oscillate at max!

AUX IN: A mono input of your choosing.

TRIGGER, CUTOFF CV, AUX IN and OUTPUT connectors are all 3.5mm mono.

SOUND OUTPUT: The Metal Synth is capable of generating a wide range of frequencies and as such will work best with a wide range speaker/amplifier rather than a typical guitar/bass amp.

 

CHECK OUT THE VIDEO!

Directed and produced by midierror

 

FLOW DIAGRAM GOODNESS!

 
 
 
 

 

 
 

Specs & Downloads

Specs & Downloads

Manufacturer Rakit
HP No
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide + BOM

Reviews

Write Your Own Review

You're reviewing: Rakit Metal Synth Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.