My Cart

Mini Cart

Chaos Divider Partial Kit

Chaos Divider Partial Kit


From Tskylon Labs: a CV controllable, multi-divisor, revolutionary clock modulator we call the CHAOS DIVIDER HV

This is a Partial Kit in the Eurorack format. It includes the PCB/Panel, nixie, nixie driver, LED's, and programmed IC. You'll still need to purchase many parts from Mouser, etc.

Availability:Out of stock
Brand Tsyklon Labs

A clock signal. A serial chain of pulses. Some wide, some narrow. Some pulses are taller than others. Others, not so much. A clock may not the most exciting signal that gets passed around a modular synth, but it is certainly a useful signal. Take that clock pulse and pass it back out. But maybe instead of high fidelity, you drop every other pulse. Or maybe every third, or fifth, or eighth. By dividing your clock train, you can run an entire “drum set” of modules with one input and many outputs. But what happens when you add unpredictability, chaos if you will, to a normally pedestrian module? You get a CV controllable, multi-divisor, revolutionary clock modulator we call the CHAOS DIVIDER HV:

It is easy to be distracted by the glow of the Mode indicating Nixie tube (HV means HIGH VOLTAGE), this is a hard module to miss. But look past the neon beauty, and you will see a module with brains too. Front panel or CV selectable divisor mode, 9 outputs (inverted or normal outputs selectable with front panel toggle switch), division reset via push-button or trigger/gate input, and front panel and CV controls for Intensity and Interval chaos variables. Oh, and a clock signal.

The Mode control lets you select the divisor sequence from the list displayed to the left of the Nixie tube. In CHAOS mode, the divisors change at random according to the Intensity and Interval chaos variable selectors. The Intensity variable changes the range of the randomly selected divisor and the Interval variable changes how often divisors are recalculated. In non-CHAOS mode, the Interval variable introduces slip (or delay) to the outputs. This causes the outputs to be delayed from the incoming clock signal. Similarly, in non-CHAOS mode, the Intensity variable selects whether the slip applied to all outputs is the same (low Intensity) or varies across the outputs (high Intensity).

A few technical details: CV input allowable range is 0-10VDC. Anything over 10VDC is limited to 10VDC. The output pulses can be individually configured from 5-10VDC with a twist of a trimpot. Front panel controls behave as an attenuator for CV inputs.

Additional Information
More Information
Brand Tsyklon Labs
HP 12
Depth 51mm
+12V 165mA
-12V 0mA
+5V 0mA
Additional Resources BOM & Build Guide

Write Your Own Review

You're reviewing: Chaos Divider Partial Kit