NLC Router PCB

The Router can deliver 1 into 4, 4 into 4 and 4 into 1 at the same time, 2x2 into 2 and, with a simple mod to the PCB, 2x1 into 2


This is a PCB only set in the Eurorack format.


Availability: In stock

$19.99
OR

Details

Details

The Router was developed to use in the cellF neural synthesizer at MoNA’s Mofo exhibition in Jan 2017. As cellF would be left running for 6-8 hours per day, we wanted a module to periodically switch around the CV signals to create new patches.

The Router's pots can be used as switches, 0 is off and 10 is on. At these settings the switches will ignore incoming CV or gate signals. For the switching to be controlled by CV or gates, set the pots to an appropriate turn-on point.

Some notes:

  • Input 1 is internally connected to the switches on jacks 2, 3 & 4
  • CV 1&2 is internally connected to the switch on the CV 3&4 jack
  • The signals to the OUT ALL jack are summed together, as more than one signal can be on at a time; this is the safest way to merge them
  • The Router can deliver 1 into 4, 4 into 4 and 4 into 1 at the same time, 2x2 into 2 and, with a simple mod to the PCB, 2x1 into 2

Specs & Downloads

Specs & Downloads

manufacturer Non-Linear Circuits
HP No
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide & BOM

Reviews

Write Your Own Review

You're reviewing: NLC Router PCB

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.