Bindubba PCB

This is a reboot of the bindubba3 sequencer which was originally released in March 2010,


This is for a PCB only, suitable for the Eurorack format.

Availability: In stock

$29.99
OR

Details

Details

This is a re-boot of the bindubba3 sequencer which was originally released in March 2010, tho there have been a few changes since that version. The bindubba3 has no software or microprocessors on board, it is all CMOS, op amps and vactrols.
It is designed to be used with the Divide & Conquer.

This sequencer has 6 inputs to control the stepping. Two clock inputs control the count in horizontal and vertical directions. The two jump inputs send the next step somewhere else that depends on the 2^2 and 2^3 counts of the chips of both step directions......ie somewhat uncontrollable but it enables more complex patterns to be created. The two direction inputs change the direction of the count.

There are two voltage controlled slewed outputs, two CV outputs giving the same CV, 1 inverted CV output and 16 gate outputs.

Specs & Downloads

Specs & Downloads

100 Non-Linear Circuits
HP 28
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide & BOM

Reviews

Write Your Own Review

You're reviewing: Bindubba PCB

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)

NLC Bindubba Sequencer

NLC Bindubba Sequencer

From: $29.99

To: $134.97