Pre-Built uTU: 8hp Temps Utile PCB

Micro Temps Utile is a A six-channel trigger generator/clock distributor/and MORE in an 8hp package


This is for a PCB only in the Eurorack format. However - all SMD parts are already placed and soldered for you! Just add your through hole parts and go!

Availability: In stock

$139.99
OR

Details

Details

Temps Utile in an 8hp package! 

hardware specs: 


  • teensy 3.2 @ 120MHz, w/ 128x64 OLED 
  • 16.67kHz update rate, < 100us trigger-to-output latency 
  • 2 clock inputs (> 100k input impedance; threshold ~ 2.5V) 
  • 4 CV inputs (100k input impedance, -/+ 5V, assignable to (almost) any parameter) 
  • 6 clock outputs (5 digital, 1 DAC (12 bit): 10V (GPIO), -/+ 6V (DAC)) 
  • two encoders w/ switch; 2 tactile buttons. 
  • 14HP, ~ 25 mm Depth 
  • stupid name courtesy of M. Louis Lapicque 


firmware: 

6 (independent) channels / 6 modes per channel: 

  • trigger sequencer/sequence editor 
  • clock division/multiplication 
  • LFSR 
  • random w/ threshold 
  • euclidian 
  • logic (AND, OR, XOR, NAND, NOR, XNOR) 
  • DAC (channel #4 only): random, binary, "Turing", logistic, sequencer/arpeggiator 

hardware/software/etc: 

https://github.com/jakplugg/T_u

build guide: 

https://github.com/mxmxmx/temps_utile-/wiki/build-it 

Note about the panel: there are 2 different hole spacing for the displays, Adafruit or ones made from the adafruit gerbers will fit the FPD panel in the panel folder. chinese ones from ebay, amazon, alliexpress, etc have a different hole spacing (see the pdf for oval holes used on PCB-panel) the PCB also has oval holes to support both displays.

There are Gerber files for a budget "pcb panel" in the gerbers folder.



Specs & Downloads

Specs & Downloads

Manufacturer Modular Addict
HP 8
Depth 25mm
+12V 85 mA
-12V No
+5V No
Additional Resources Build Guide
BOM
OLED Display eBay

Reviews

Write Your Own Review

You're reviewing: Pre-Built uTU: 8hp Temps Utile PCB

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.