MFOS 16 Step Sequencer Auxiliary GATE/LED Driver
MFOS 16 Step Sequencer Auxiliary GATE/LED Driver
$15.00
From MFOS - a 16 step sequencer auxiliary GATE/LED driver PCB!
This is for a PCB only, suitable for multiple formats.
Availability:In stock
This is a very challenging project requiring understanding of electronics and electronic building and trouble shooting skills and equipment. Access to a good oscilloscope, DVM, bench power supply, soldering station and hand tools will be required. Only the schematic, circuit description, and suggested panel layout are provided. Please do not attempt this project unless you thoroughly understand the operation and can troubleshoot it (as with any complex project, you will probably need to). Please read over the entire project before ordering PC boards or other products.
Introduction
This board is designed to work with the MFOS 16 Step Sequencer and supports both another set of "active step" LED indicators and another set of gate switches if that's something you want or need to build. So when you decide to expand your sequencer with another MFOS 16 Step Sequencer Analog board you'll want to add "active step" LED indicators and this board is perfect for that. Or maybe you want to build the Vari-Clock module into a separate cabinet because your sequencer cabinet is full... again you'll want to add "active step" LED indicators and this board is perfect for that. Or let's say you want another set of gate switches and another gate and trigger output and "active step" LED indicators... guess which board is perfect for that... BINGO! This is the very board. I will show the board as used in these two modes: 1) as another set of both LEDs and gate/trigger switches and 2) as just another set of LEDs.
| Brand | Music From Outer Space |
|---|---|
| Additional Resources | http://www.musicfromouterspace.com/index.php?MAINTAB=SYNTHDIY&PROJARG=SEQUENCER_AUX_GATE_LED/SEQUENCER_AUX_GATE_LED.php&VPW=1910&VPH=863 |