FoH Plague Bearer Kit

 The Flight of Harmony Plague Bearer is described as a filter, a waveshaper, a mangler, a crusher, and more for the Eurorack Modular Format.


This is a Full Kit set in the Eurorack format.

Availability: Out of stock

Notify me when this product is back in stock:
Email:
$84.99

Details

Details

The Plague Bearer is called a filter, but that is just a description of the circuit topology, what it can actually do goes way beyond that. It has been described as a filter, a waveshaper, a mangler, a crusher, and – my favorite – as an “FSU module”.

I think calling it a filter may be a bit misleading, but I have no idea what else to call it. It is a filter, but it does more (all at the same time, really) excessive phase shifting, waveforming, ringing, formant generation, and so on. I guess it could be called a waveform modifier or enhancer, but those don’t sound good either. I nameed it the Plague Bearer for a reason.

If you are looking for technical synthophile specs you are out of luck here. All f(h) devices are designed in accordance with how they sound, not to achieve mathematical perfection. The most common question I receive is, “what is the filter slope?”

Honestly, I never measured that. I specifically avoided the conventional approach while I was designing this circuit, so it’s very problematic to try to describe this filter in the normal terms. The slope is directly tied to the gain of the circuit, making it variable, and the Q is affected by all three filter controls. The setup is actually a combined High- and Low-pass. The corner frequencies are adjusted by the controls and can be overlapped completely, which gives a comb-filtering effect.

Changes in Revision 4

Most changes in the r4 were for ease of assembly purposes, but two new features were added:

  • Input Attenuator: Earlier versions often required use of an external VCA to reduce input signal levels and prevent overdriving the input. This is now handled by the input attenuator.
  • Output limiting: The output levels of earlier versions could spike well beyond ±5Vp-p, so an output limiter was added. The limiter has a soft to medium curve and can be disabled by moving the two jumpers as shown on the PCB.

Changes in Revision 5 (PB-K Rev 1.0) (The most current revision, and what this product is)

Most obvious changes are the single CV inputs instead of dual summed inputs. This allowed for the controls to return to a single inline orientation.
The user can chose between isolated (input/output resistors) and non isolated (mult) signal inputs/outputs.

The kit is surface mount. Parts are clearly labeled and make for a great beginner SMT DIY project.

Printed Assembly/Build information is included with the kit. The linked manual on this page is out of date and for manual reference only. 

s

Specs & Downloads

Specs & Downloads

manufacturer Flight of Harmony
HP 8
Depth 30mm
+12V 6.5mA
-12V 4mA
+5V No
Additional Resources Build Guide & BOM
Manual

Reviews

Customer Reviews (1)

which way does this ic go???Review by rico
Will be a neat module to play with but have no idea which way this IC chip goes?!?! No schematic, not printed on the build instructions, no website. :/ (Posted on 11/2/2017)

Write Your Own Review

You're reviewing: FoH Plague Bearer Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.