Antumbra DVCA PCB/Panel

DVCA is a dual VCA based on the Mutable Instruments Veils. 


This is a  PCB and Panel only, for Eurorack format Modular

Availability: In stock

$19.99
OR

Details

Details

DVCA

DUAL VCA

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normaled, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage controlled mixer operation.

TECHNICAL SPECS

CURRENT DRAW:

◦ +12V:

17mA

◦ -12V:

17mA

◦ +5V:

0mA

 

DIMENSIONS:

◦ WIDTH:

4HP

◦ DEPTH:

20mm

 

Specs & Downloads

Specs & Downloads

100 Antumbra
HP 4
Depth 20mm
+12V 17mA
-12V 17mA
+5V No
Additional Resources Build Guide
BOMl

Reviews

Customer Reviews (1)

Great VCA, documentation could be improvedReview by Jimmy
pros:
- This is a great vca
- Low cost low hp
- Very nice build doc
- It's half a veils
- You can chain several together and use them as a mixer

cons:
- It's tricky to solder the pot's snap-in legs, they'll probably stick out to the sides a little
- the BOM linked above has an error, it says you need 1x24k resistor but actually you need 3
- when I built it I thought it was broken, later figured out I had misread the panel and had mixed up the cv in and the audio in. In my defense the symbols are VERY unclear and there's no manual available yet. Turns out the one with the triangle wave is the cv in, and the arrow is the audio in. (Posted on 8/13/2018)

Write Your Own Review

You're reviewing: Antumbra DVCA PCB/Panel

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.