Manhattan Analog's MIX is a 4HP CV mixer designed for clean, high-quality audio mixing.

This is a PCB/Panel set in the Eurorack format.

Availability: In stock




The Manhattan Analog MIX is a 4hp Eurorack module designed primarily for clean, high-quality audio mixing. It is DC-coupled so that it retains utility as a CV mixer when necessary. Jacks are at the bottom so that it retains tweakability even when fully-patched. 

Under the hood, it's a dead-simple op amp mixer with three unipolar inputs and an output which can be switched between uni- and bi-polar operation with a jumper on the board. The inputs use audio-taper pots and the output is linear to facilitate both modes of operation. It is reverse-power-protected and is completely skiff-friendly at just over 1.25" deep [33mm.] As for the op amps used, 7 different chips were tested, but there are two clear favorites - OP275 and LME49720. These consume 25mA of current, 12.5 from each rail, using the favorite LME49720.

Specs & Downloads

Specs & Downloads

Manufacturer Manhattan Analog
HP 4
Depth 38mm
+12V 12.5mA
-12V 12.5mA
+5V No
Additional Resources Build Guide


Customer Reviews (1)

Simple and usefulReview by Troy
I should've bought 5 of these. Easy build, easy to source, very useful. (Posted on 2/17/2017)

Write Your Own Review

You're reviewing: MIX PCB/Panel



Use spaces to separate tags. Use single quotes (') for phrases.