Red Light District Sequencer Partial Kit

The Golt! Red Light District partial kit is an 84hp cv&trigger sequencer in Eurorack format.


This is a partial kit in the Eurorack format. Please read the attached PDF that lists what is included w/ the kit!

Availability: In stock

$469.99
OR

Details

Details

RED LIGHT DISTRICT (RLD) is an 84HP traditional CV/Gate Sequencer that can be synchronised at different ratios to MIDI clock. Its main purpose is to create patterns that are in-time and length-related to MIDI clock. It can act as a MIDI Master using its own internal clock as a reference, or an external clock input. When slaved to MIDI, the MIDI OUT's automatically switch to THRU’s and the second MIDI OUT/THRU can also to emit DinSync. The sync ratio can be changed so that each pattern of 16 or 32 steps can take either 1, 2 or 4 MIDI bars to complete. Mode changes are quantised to the start of each pattern so synchronization is maintained with other sequencers.

On-board, two digitally controlled analogue sequencers work together to produce CV's and Gates in pattern based form. The main difference compared to traditional analogue sequencers is the ability to create time quantised spaces in between the gates, as well as the gates themselves. This effectively doubles the number of equivalent analogue steps it has, because each gate has it's own dedicated variable space after it. This allows a full ADSR to be used for envelope control, because the gates resemble a more realistic keyboard signal (key ON/OFF) rather than each gate occurring immediately one after the other (like in traditional analogue sequencers).

There are two CV's, three gates and six synchronized clock divider outs. There’s voltage control over direction, pattern, pause and reset on the timing sequencer (the 32 Step Sequencer), and voltage controlled slew on the pitch sequencer (the 12 Step Sequencer). Both CV’s on the pitch sequencer have switchable S&H circuits and CV1 (normally used for pitch) has both course and fine tune knobs to allow up to 9 octave jumps between steps, while still retaining fine control well within a semitone.

Special features include time quantised muting, clock dividers that synchronise to MIDI, internal clock, or external clock. And NO menu's at all. All functions can be changed while the sequence is running, including note insertion that doesn't change the sequence length (because the pattern length is sync'd to 4/4 MIDI).

Both on-board sequencers have comprehensive direction control, including a Brownian Random and Voltage Addressed Stepping on the 12 step sequencer. Both CV’s can also be used as a rudimentary Attack/Release generators; with global slew, peak-height and width, adjustable per step.

Power Consumption:

  • +12V: 125mA (90mA when idle)
  • +5V: Not Used (there is a +5V regulator on board)
  • -12V: 7mA


What's included in the Partial Kit: 
The panel (2mm Aluminium power coated white and screen printed), two PCB's and three processors. All toggle switches (54), pots (39), mono jacks (20), DIN jacks (3), rotary switch (1) and all board connectors, headers, mounting hardware etc... Basically all the expensive or hard to get stuff is included, potentially at a big discount. What IS NOT included are all passives (diodes, resistors, capacitors) and all IC's (mostly 74HC logic and some linear stuff). 


Please see the BOM, packing list and build manual for more detail. 

Specs & Downloads

Specs & Downloads

100 Golt!
HP No
Depth No
+12V 125mA (90mA when idle)
-12V 7mA
+5V No
Additional Resources User Manual
low-res Build Guide V2.1
hi-res Build Guide V2.1
BOM
Continued Reading

Reviews

Write Your Own Review

You're reviewing: Red Light District Sequencer Partial Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.