Castle 011 Shift Register PCB/Panel

The Shift Register is a 4 position memory of sorts. 

This is a PCB/Panel set in the Eurorack Video Synthesis format. 

Availability: In stock




The Shift Register is a 4 position memory of sorts. A bit is loaded from the DATA input at a logical “high” signal at the CLOCK input and appears at the Q0 output. At the next high Clock signal the bit is shifted from Q0 to Q1 and a new bit is loaded in to Q0 from DATA. When a bit reaches Q3 it is shifted out of the register. This functions as a delay on a 1-Bit datastream, where the CLOCK determines delay. If the outputs are combined with an XOR gate, an outline is achieved.

+12V Current Consumption: 21mA
-12V Current Consumption: 43mA


Attention: Castle Series printed circuit boards and EuroRack frontpanels are offered as a resource for intermediate and advanced level Synth DIY enthusiasts who are experienced with assembling thru hole electronics assemblies and sourcing electronic components.  We do not offer full parts kits, assembled modules, or technical support for DIY project offerings.  Our guarantee is that the module will perform as intended when built in accordance with the supplied documentation, and that there will be no defects with the printed circuit board itself.  If you are new to Synth DIY or need help troubleshooting your assemblies, please locate our user communities online.

Specs & Downloads

Specs & Downloads

Manufacturer LZX
HP 4
Depth No
+12V 21mA
-12V 43mA
+5V No
Additional Resources No


Write Your Own Review

You're reviewing: Castle 011 Shift Register PCB/Panel



Use spaces to separate tags. Use single quotes (') for phrases.