Single Multiplier/Divider PCB

This is a simple and easy to use voltage controlled frequency divider/multiplier. It has a range of x4 to /16.

This is a PCB only (including programmed microcontroller) suitable for multiple formats.

Availability: In stock




This module is used to multiply or divide the frequency of a clock or VCO signal. It's maximum multiplaction is 4x and it's maximum division /16. The multiplication or division level is set by a single knob, and can be modulated by external control voltage.


  • Manual Division Knob – This selects the amount of multiplication or division. Turning the knob clockwise increases the amount of division.
  • Aux Division Knob – This attenuates the external CV used to modulate the division knob's setting.


  • Main Input – This is the input for the frequency to be divided/multiplied.
  • Reset Input – This is used to synchronize the divided frequency with another module. This should be a 0 to 5V trigger or gate signal.
  •  CV Input – This is control voltage used to adjust the division. The more positive the voltage, the more division.


  • Main Output – This is a 0 to +5V square wave output of the divided/multiplied signal

Specs & Downloads

Specs & Downloads

100 Barton
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide


Write Your Own Review

You're reviewing: Single Multiplier/Divider PCB



Use spaces to separate tags. Use single quotes (') for phrases.