AI Synthesis Looping ADSR Kit

The AI003 Looping ADSR Envelope Generator DIY kit is a looping ADSR Envelope Generator. It can be manually triggered via momentary pushbutton, gated via the gate signal, triggered or re-triggered by a trigger input, or set into a loop mode via a toggle switch. An LED shows the status of the output.


This is a full kit set in the Eurorack format.


Availability: Out of stock

Notify me when this product is back in stock:
Email:
$64.99

Details

Details

The AI003 Looping ADSR Envelope Generator DIY Kit is a looping ADSR Envelope Generator. It can be manually triggered via Momentary Push Button, Gated via the Gate Signal, Triggered or re-triggered by a Trigger input, or set into a loop mode via a toggle switch. An LED shows the status of the output.

This Looping ADSR Envelope Generator DIY Kit circuit was derived (with permission) from the great and simple circuit (only 2 ICs!) from Nicolas on the Electromusic.com forums. With some help from the great Dave Brown, the circuit was updated to provide additional voltage protection, more uniform looping and gate behavior, more precise LED monitoring, and some nice user experience updates.

In Gate or Trigger mode, the envelope can be used as a traditional ADSR envelope generator. In loop mode, the output sends a variable exponential waveshape between Ramp, Triangle, and Sawtooth LFO with control over the attack and decay of the LFO shape.

Minimum Gate/Trigger Signal: 2V
Attack Time: 20ms – 14 seconds
Decay Time: 10ms – 20 seconds
Release Time: 100ms – 7 seconds
Max Voltage (when run off +/- 12V): 7.5V

All jacks, knobs, and other components are soldered directly to the PCB. There is no wiring, making this kit ideal for those who know how to solder, but are still starting out in their DIY Synthesis journey.

We recommend this kit as the third module you build. It is easy, has only two ICs, and can be built in a single sitting. If it works, you are ready to build other modules.

The Build Guide is here

The Eurorack Kit Contains everything you need to build your first DIY Analog Synth Module:

  • High Quality 3.5 mm Jacks
  • A PCB
  • A Eurorack Panel
  • High quality Alpha Potentiometers
  • All components required to build the AI003 Looping ADSR Envelope Generator.

Specs & Downloads

Specs & Downloads

manufacturer AI Synthesis
HP 8
Depth No
+12V 15mA
-12V 14mA
+5V No
Additional Resources Build Guide

Reviews

Customer Reviews (1)

Great ADSR! Great Kit!Review by Scott Parmley
This is a really great, simple ADSR envelop generator. I built this as my 6th module and did it short of 2 hours. Super nice PCB layout and had ample room when soldering components. The envelop itself performs really well! I wasn't sure about the lack of low, medium, and high range selection but the circuit is designed to not need that. It's a very wide range on each parameter. Would have liked an additional EG out or an inverted envelop but for the price, it's an exceptional bargain! If you're new to DIY but have built at least one other module, this one would be great next. (Posted on 4/25/2017)

Write Your Own Review

You're reviewing: AI Synthesis Looping ADSR Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.