Trigger Expander Kit

This will give your VC Sequencer 8 individual outputs for each step outputting either a trigger or a gate, selectable with a jumper on the pcb, and a 9th output that gives you a trigger for each step progression.


This is a full kit set in the Eurorack format.

Availability: In stock

$64.99

Details

Details

The RYO Trigger Expander will give your VC Sequencer 8 individual outputs for each step outputting either a trigger or a gate, selectable with a jumper on the pcb, and a 9th output that gives you a trigger for each step progression.

Also on board is a trimmer for setting the trigger length to your liking (approximately 1-20 mS). Usually you want to set this as low as possible to reach higher rates. Different trigger lengths can give a different sound from pinging filters or striking lowpassgates. Some vintage gear also require longer trigs. The gates are high for the full duration of each step.

The outputs are diode isolated, this allows for passive mixing of the outputs using a passive multiple/stackcable/IV cable, or a switched multiple/OR combiner such as the Doepfer A-182 or Low-Gain Short Bus.

The kit comes supplied with two PCBs (one with a v-cut that you break into two), front panel (PCB material), component kit, power and expansion cables and mounting screws. Solder and tools are not supplied.

Specs & Downloads

Specs & Downloads

manufacturer RYO
HP 4
Depth 45mm
+12V 12mA
-12V 0mA
+5V No
Additional Resources Build Guide Schematics

Reviews

Write Your Own Review

You're reviewing: Trigger Expander Kit

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.