CGS Trunk Line PCB/Panel

These boards can be used as cascadable multiples, to create trunk lines between different cabinets, or assuming you have something else that uses the same termination, for expansion/breakout.


This is a PCB/Panel suitable for multiple formats.

Availability: Out of stock

Notify me when this product is back in stock:
Email:
$10.99

Details

Details

These boards can be used as cascadable multiples, to create trunk lines between different cabinets, or assuming you have something else that uses the same termination, for expansion/breakout. It uses 16 way ribbon, like used in Euro power, every second wire connected to ground to form a shield between the signal wires. You can mount one of these in each cabinet of a large system, and hook them up from behind with the ribbon. If you hook just two in different cabinets together, you have 8 trunk lines between them, reducing the need for long patch cables. If you place one in each of several cabinets, and run a common ribbon between them, then you have an inter-cabinet bus. If you mount them side by side, and use a common ribbon between them, you have a multiple. As a bonus, the board is designed to work with banana jacks as well, so your bus/trunk lines can go between different types of synths (mini jacks and bananas).

 

 

Pad identification:

0V 0V/GND power rail for use with Banana installations

Specs & Downloads

Specs & Downloads

manufacturer CGS
HP No
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide

Reviews

Write Your Own Review

You're reviewing: CGS Trunk Line PCB/Panel

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.