Panel Keyboard PCB

This is a compact keyboard the size of a synthesizer module. Good for when you only need to hit a few notes and don't want to bring a full size controller with you or if you just need precise control over something being controlled by CV.


This is a PCB only (including programmed microcontroller) suitable for multiple formats.


Availability: In stock

$17.99

Details

Details

This module is a keyboard, only mounted with your other modules in your modular synthesizer rather than in a separate housing. It does this by using a small number of push-buttosn instead of traditional keys. This can be used like a traditional keyboard to play melodies, or it can be used a precision voltage reference for voltage controlled parameters in other modules.

CONTROLS

  • Pitch select buttons. There are 12 buttons corresponding to a chromatic scale. They are arranged like a typical keyboard with sharp/flat notes in a seperate row. Whenever two buttons are pressed at the same time, the lower in pitch of the two will be output.
  • Octave select knob. This knob selects which of five octaves the keyboard will output. There are 4 LEDs above the knob which give visual feedback for which octave is active.
  • Slew knob. This knob adjusts the rate of slew/glide/glissando between notes. Fully counterclockwise is no slew at all.

OUTPUTS

  • CV output. This output goes from 0 to 5VDC in 1/12th volt intervals to corresond to the 1v/octave standard commonly used in synthesizer modules.
  • Trigger output. This is a short pulse output whenever a pitch select button is pressed. It alternates between 0 and 5VDC
  • Gate output. This pulses up whenever a pitch select button is pressed and remains high (5V) until the button is depressed.

Specs & Downloads

Specs & Downloads

manufacturer Barton
HP No
Depth No
+12V No
-12V No
+5V No
Additional Resources Build Guide

Reviews

Write Your Own Review

You're reviewing: Panel Keyboard PCB

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.